771575

Kaysun KCCT-384B IPS Manual

13
Zoom out
Zoom in
Previous page
1/80
Next page
9
3. FUNCTION DESCRIPTION
Preparation
Local Network Connections
The KCCT-384B IPS(A) uses a switch to connect to the local area network. The IP addresses of the
computer or other similar equipment and that of the KCCT-384B IPS(A) must be located in the same
subnet segment.
IP Settings
By default, the IP address of the KCCT-384B IPS(A) is 192.168.100.40 and the subnet mask is
255.255.255.0.
For the IP address of a computer or other similar equipment, you need to manually congure the static
IP address that must be on the 192.168.100 segment with 255.255.255.0 as the subnet mask. If the
computer only connects to the KCCT-384B IPS(A), then this is implemented using a single IP address.
If the computer also connects to the local networks in addition to the KCCT-384B IPS(A) network, then
you will need multiple IP addresses. The following gure shows the implementation method (Windows 7
system is taken as an example).
- Congure single IP address
Open the Internet Protocol TCP/IP Properties page to congure the IP address and subnet mask. For
example, set the IP address to 192.168.100.44 and the subnet mask to 255.255.255.0.
Click "OK" when the conguration is done.
- Add multiple IP addresses
You need to rst congure a static IP address before you can add multiple IP addresses. The steps to
congure the static IP address are as follows:
1) Check local IP address
Open the Internet Protocol TCP/IP Properties page as shown in Figure 2.2. If the option "Use the
following IP address:" is selected and there is an IP address listed here, it indicates that the local IP
address is a static IP address. Otherwise, it is a dynamic IP address and you need to congure a
static IP address.
2) Congure static IP address
Open the Run Command box from the Start Menu as shown in the following gure:
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KCCT-384B IPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KCCT-384B IPS in the language / languages: English as an attachment in your email.

The manual is 16.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info