771575
5
Zoom out
Zoom in
Previous page
1/80
Next page
1
1. HARDWARE INSTALLATION
1.1. General Safety Precautions
Please read these general safety precautions carefully before installing the KCCT-384B IPS(A).
After completing the installation, make sure the power supply and KCCT-384B IPS(A) operate properly
during the startup operation.
1.1.1 General
If you are not sure how to install or operate KCCT-384B IPS(A), contact your dealer.
NOTICE
Improper installation or attachment of equipment or accessories could result in electric shock,
short-circuit, leaks, fire or other damage to the equipment. Only use accessories, optional
equipments and spare parts made or approved by manufacturer.
WARNING
Make sure installation, testing and applied materials comply with the applicable legislation.
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses, etc.) while
installing, maintaining or servicing the system.
WARNING
To avoid danger of suffocation, keep the plastic packaging bags away from the reach of children.
1.1.2 Installation Site
Do NOT install the equipment in a potentially explosive atmosphere.
1.1.3 Electrical
DANGER: RISK OF ELECTROCUTION
Turn OFF all power supply before connecting electrical wiring or touching electrical parts.
Disconnect the power supply for more than 1 minute and measure the voltage at the terminals of
main circuit capacitors or electrical components before servicing. The voltage must be less than
50 V DC before you can touch electrical components. For the location of the terminals, see the
wiring diagram.
Do NOT touch electrical components with wet hands.
Do NOT leave the equipment unattended when the service cover is removed.
WARNING
A main switch or other means for disconnection, having a contact separation in all poles
providing full disconnection under overvoltage category III condition, shall be installed in the
xed wiring.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KCCT-384B IPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KCCT-384B IPS in the language / languages: English as an attachment in your email.

The manual is 16.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info