771526
26
Zoom out
Zoom in
Previous page
1/52
Next page
22
3.8 Power Failure Memory
Function
The power supply to the system fails
unexpectedly during operation. When the
system is powered on again, the wired
controller continues to operate according
to the status before the last power failure,
including the power-on/off status, mode, set
temperature, failure, protection, wired controller
address, timer, hysteresis, etc. However, the
memorized content must be the content set at
least 7s before the power failure.
3.9 Parallel Function of
Wired Controller
1) A maximum of 16 wired controllers can
be connected in parallel, and the address
can be set in the range of 0 to 15.
2) After wired controllers are connected in
parallel, wired controllers with the same
address are not allowed on the bus;
otherwise a communication failure will occur.
3) After multiple wired controllers are
connected in parallel, data is shared
among them, e.g., the power-on/off
function, data settings (such as the water
temperature and hysteresis) and other
parameters will be kept consistent (note:
The mode, temperature, and hysteresis
settings can be shared only when the
system is powered on).
4) Start point of data sharing: After the
power-on/off button is pressed, data can
be shared during parameter adjustment.
The "OK" button must be pressed after
parameters are adjusted, and the nally
adjusted values will be shared.
5) Since the bus is processed in the polling
mode, the data of the wired controller
with the minimum number is valid if
multiple wired controllers are operated
at the same time in the same bus cycle
(4s). Avoid the above situation during
operation.
6) After any of parallel wired controllers
has been reset, the address of this wired
controller is 0 by default.
3.10 Monitoring Setting of
Wired Remote Controller
Press the "MENU" and "►" buttons for 3s at
the same time to access "SET ADDRESS"
interface, The interface display is as follows:
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KCCHT-05 MODBUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KCCHT-05 MODBUS in the language / languages: English as an attachment in your email.

The manual is 3.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KCCHT-05 MODBUS

Kaysun KCCHT-05 MODBUS User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info