771399
20
Zoom out
Zoom in
Previous page
1/36
Next page
Correct orientation of Mounting Plate
Abertura con cubierta de plástico
24k
9k, 12k, 18k
Page 20
MOUNTING PLATE DIMENSIONS
Different models have different mounting plates. For
the different customization requirements, the shape
of the mounting plate may be slightly different. But the
installation dimensions are the same for the same size of
indoor unit.
See Type A and Type B for example:
NOTE: When the gas side connective pipe is Ø 16mm
(5/8in) or more, the wall hole should be 90mm (3.54in).
Step 4: Prepare refrigerant piping
The refrigerant piping is inside an insulating sleeve
attached to the back of the unit. You must prepare
the piping before passing it through the hole in the
wall.
1. Based on the position of the wall hole relative to
the mounting plate, choose the side from which the piping
will exit the unit.
2. If the wall hole is behind the unit, keep the knock-
out panel in place. If the wall hole is to the side of the
indoor unit, remove the plastic knock-out panel from that
side of the unit. This will create a slot through which your
piping can exit the unit. Use needle nose pliers if the
plastic panel is too difcult to remove by hand.
3. If existing connective piping is already embedded
in the wall, proceed directly to the Connect Drain Hose
step. If there is no embedded piping, connect the indoor
unit's refrigerant piping to the connective piping that will
join the indoor and outdoor units. Refer to the Refrigerant
Piping Connection section of this manual for detailed
instructions.
NOTE ON PIPING ANGLE
Refrigerant piping can exit the indoor unit from four
different angles: Left-hand side, Right-hand side, Left
rear, Right rear.
CAUTION
Be extremely careful not to dent or damage the piping
while bending them away from the unit. Any dents in the
piping will affect the unit's performance.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KAY-CF 35 DR9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KAY-CF 35 DR9 in the language / languages: English as an attachment in your email.

The manual is 3.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KAY-CF 35 DR9

Kaysun KAY-CF 35 DR9 User Manual - German - 36 pages

Kaysun KAY-CF 35 DR9 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info