771578
36
Zoom out
Zoom in
Previous page
1/64
Next page
36
9 - START-UP
Reading the objective operating conditions is useful for
checking the unit over time.
With unit of full load, namely in stable conditions and close to
those of work, take the following data:
 Voltage and general absorptions with unit at full load
 Absorption of varied electrical loads (compressors, fans,
etc)
 Temperature and air flow, both inlet and outlet from unit,
fridge data
 The readings should be stored and made available during
maintenance .
9.7 STARTING REPORT
9.6 - BASIC FUNCTION
Vacation mode
After pressing "Vaction" button, Unit will automatically heat
water to 15°C for the purpose of energy saving during vaca-
tion days.
How is the unit running
If unit is OFF, press unit will be waken, press
to set target water temperature (38-70°C), press unit
will automatically select mode and start to heat water to target
temperature.
Query function
For the convenience of maintenance and debug, query
function is available by press 2 buttons together: “ ” +
” ,then system running parameters will be shown
one by one with following sequence by each pushing
of " " or " " button.
N. Hour
low bit
Min.
higt bit
Min.
low bit
Temp. /
Days Description
1 5 Temp.
T5U: Storage tank
temperature sensor
(Upper)
2 5 Temp.
T5L: Storage tank
temperature sensor
(Lower)
33 Temp. T3: Evaporator
temperature sensor
44 Temp. T4: Ambient
temperature sensor
5Temp. Tp: Discharge
temperature sensor
6Temp. Th: Suction
temperature sensor
7Current Compressor
8 1 Last error code
9 2 Previous 1 st error or
protection code
10 3 Previous 2 st error or
protection code
11 Software number
Weekly disinfect function
Under disinfection mode unit immediately start to heat water
up to 70°C to kill the potential legionella bacteria inside water
of storage tank,“ ”icon will light on the display screen
during disinfection; Unit will quit disinfection mode if water
temperature is higher than 70°C and extinguish “ ”icon.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun COMPAK KHPA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun COMPAK KHPA in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info