771578

Kaysun COMPAK KHPA Manual

10
Zoom out
Zoom in
Previous page
1/64
Next page
10
2 - RESIDUAL RISKS / DISPOSAL
CE WEEE DIRECTIVE
The manufacturer is registered on the
EEE National Register, in compliance with
implementation of Directive 2012/19/EU
and relevant national regulations on waste
electrical and electronic equipment.
This Directive requires electrical and
electronic equipment to be disposed of
properly.
Equipment bearing the crossed-out
wheelie bin mark must be disposed of
separately at the end of its life cycle to
prevent damage to human health and to
the environment.
Electrical and electronic equipment must
be disposed of together with all of its
parts.
To dispose of “household” electrical and
electronic equipment, the manufacturer
recommends you contact an authorised
dealer or an authorised ecological area.
“Professional” electrical and electronic
equipment must be disposed of by
authorised personnel through established
waste disposal authorities around the
country.
In this regard, here is the definition of
household WEEE and professional
WEEE:
WEEE from private households: WEEE
originating from private households and
WEEE which comes from commercial,
industrial, institutional and other sources
which, because of its nature and quantity,
is similar to that from private households.
Subject to the nature and quantity, where
the waste from EEE was likely to have
been by both a private household and
users of other than private households, it
will be classed as private household
WEEE;
Professional WEEE: all WEEE which
comes from users other than private
households.
This equipment may contain:
refrigerant gas, the entire contents of
which must be recovered in suitable
DISPOSAL containers by specialised personnel with
the necessary qualifications;
•lubrication oil contained in compressors
and in the cooling circuit to be collected;
•mixtures with antifreeze in the water
circuit, the contents of which are to be
collected;
•mechanical and electrical parts to be
separated and disposed of as authorised.
When machine components to be
replaced for maintenance purposes are
removed or when the entire unit reaches
the end of its life and needs to be
removed from the installation, waste
should be separated by its nature and
disposed of by authorised personnel at
existing collection centres.
Dismantling and disposal
THE UNIT MUST ALWAYS BE SENT TO
AUTHORISED CENTRES FOR
DISMANTLING AND DISPOSAL.
When dismantling the unit, the fan, the
motor and the coil, if operating, may be
recovered by the specialist centres for
reuse. All the materials must be recovered
or disposed of in compliance with the
corresponding national standards in force.
For further information on the
decommissioning of the unit, contact the
manufacturer.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun COMPAK KHPA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun COMPAK KHPA in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info