Manual Kaysun Aquantia PRO Monobloc - KHP-MO (page 42 of 80) (English)

771521

Zoom out

Zoom in

1/80

B.1 When unit detect voltage is 230VAC between H and N, unit turn on.

B.2 When unit detect voltage is 0VAC between H and N, unit turn off.

Wiring of the 3-way valve is different for NC(normal close) and NO (normal open). Before wiring, read the Installation

& Owner's manual for the 3-way valve carefully and install the valve as showed in the picture. Make sure to connect it

to the correct terminal numbers.

NOTE

3) For 3-way value SV3

Control port signal type

Voltage

Maximum running current(A)

Wiring size(mm2)

Type 1

220-240VAC

0.2

0.75

SV1

1ON

1OFF

SV2

2ON

2OFF

SV3

3ON

3OFF

Procedure

Connect the cable to the appropriate terminals as shown in the picture.

Fix the cable reliably.

P_c N

921

PUMP_c

CONTROL SIGNAL

OUTPUT

(For zone 2 pump)

P_o N

PUMP_o

CONTROL SIGNAL

OUTPUT

(For zone 1 pump or

outside circulating pump )

10 22

P_s N

PUMP_s

CONTROL SIGNAL

OUTPUT

(For solar pump)

11 23 P_d N

PUMP_d

CONTROL SIGNAL

OUTPUT

(For DHW tank

circulating pump)

12 24

4) For different functions pumps：

Procedure

Connect the cable to the appropriate terminals as shown in the picture.

Fix the cable with cable ties to the cable tie mountings to ensure stress relief.

When ROOM THERMOSTAT is set to YES, the indoor temperature sensor Ta can’t be set to valid, unit running only

according to T1.

NOTE

Method C

Hydraulic module is connected with two external temperature controllers, while user interface FOR SERVICEMAN set DUAL

ROOM THERMOSTAT to YES:

C.1 When unit detect voltage is 230VAC between H and N ,the MAIN side turn on.When unit detect voltage is 0VAC between

H and N, the MAIN side turn off.

C.2 When unit detect voltage is 230VAC between C and N, the ROOM side turn on according to climate temp curve. When unit

detect voltage is 0V between C and N, the ROOM side turn off.

C.3 When H-N and C-N are detected as 0VAC, unit turn off.

C.4 when H-N and C-N are detected as 230VAC, both MAIN and ROOM side turn on.

The wiring of the thermostat should correspond to the settings of the user interface. Refer to 10.7 Field setting/Room

Thermostat.

Power supply of machine and room thermostat must be connected to the same Neutral Line and (L2) Phase Line(for

3-phase unit only).

NOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Aquantia PRO Monobloc - KHP-MO in the language / languages: English as an attachment in your email.

The manual is 27.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Aquantia PRO Monobloc - KHP-MO

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - German - 88 pages

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - Dutch - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kaysun Aquantia PRO Monobloc - KHP-MO Manual

Product: