Manual Kaysun Aquantia PRO Monobloc - KHP-MO (page 12 of 80) (English)

771521

Zoom out

Zoom in

1/80

Strong winds of 5 m/sec or more blowing against the unit's air outlet causes a short circuit (suction of discharge air), and this

may have the following consequences:

- Deterioration of the operational capacity.

- Frequent frost acceleration in heating operation.

- Disruption of operation due to rise of high pressure.

- When a strong wind blows continuously on the front of the unit, the fan can start rotating very fast until it breaks.

To prevent exposure to wind, install the unit with its

suction side facing the wall.

Never install the unit at a site where the suction side

may be exposed directly to wind.

To prevent exposure to wind, install a baffle plate on

the air discharge side of the unit.

In heavy snowfall areas, it is very important to select

an installation site where the snow will not affect the

unit. If lateral snowfall is possible, make sure that the

heat exchanger coil is not affected by the snow (if

necessary construct a lateral canopy).

6.1 Selecting a location in cold climates

Refer to "Handling" in section “4 Before installation”

When operating the unit in cold climates, be sure

to follow the instructions described below.

NOTE

①Construct a large canopy.

②Construct a pedestal.

Install the unit high enough off the ground to prevent it

from being buried in snow.

In case of strong wind and the wind direction can be

foreseen,refer to the figures below for installation of the

unit(any one is OK):

Turn the air outlet side toward the building's wall, fence

or screen.

Make sure there is enough room to do the installation.

Set the outlet side at a right angle to the direction of the

wind.

Prepare a water drainage channel around the

foundation, to drain waste water from around the unit.

If water does not easily drain from the unit, mount the

unit on a foundation of concrete blocks, etc. (the

height of the foundation should be about 100 mm

(3.93 in).

If you install the unit on a frame, please install a

waterproof plate (about 100 mm) on the underside of

the unit to prevent water from coming in from the low

side.

When installing the unit in a place frequently exposed

to snow, pay special attention to elevate the founda-

tion as high as possible.

If you install the unit on a building

frame, please install a waterproof plate

(field supply) (within 150mm of the

underside of the unit) in order to avoid

drain water dripping. (See the picture in

the right).

＞300mm

＞3000mm

①

②

In normal condition,refer to the figures below for install-

ation of the unit:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Aquantia PRO Monobloc - KHP-MO in the language / languages: English as an attachment in your email.

The manual is 27.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Aquantia PRO Monobloc - KHP-MO

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - German - 88 pages

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - Dutch - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kaysun Aquantia PRO Monobloc - KHP-MO Manual

Product: