771433
26
Zoom out
Zoom in
Previous page
1/45
Next page
Page 26
Indoor Unit
Installation
Step 3: Mounting the indoor unit
Step 4: Water filling and anti freezing
measures
Required service space
Water filling and emptying
500
200
1150
350300
The weight of the indoor unit is heavy .
Two persons are required to mount the
unit.
WARNING
Fix the wall mounting bracket to the wall using
appropriate plugs and screws.
Make sure the wall mounting bracket is
completely level.
When the unit is not installed level, air might
get trapped in the water circuit resulting in
malfunctioning of the unit.
Hang the indoor unit on the wall mounting
bracket.
Fix the indoor unit inside using appropriate
plugs and screw.
For the rst operation, it is recommended to
rotate the pump shaft for more than 10 turns
to prevent the pump from getting stuck.
Exhaust valve shall be set at the highest point
and local highest point of water system
pipeline, and drain valve shall be set at the
lowest point.
After the indoor unit and outdoor unit are
installed, conrm that the power supply is
closed, loosen the vent valve on the indoor
unit, and inject water into the water system of
indoor unit.
Check the water system for leaks.
If there is no leakage in the system pipeline,
the power supply of the unit will enter the
emptying mode of the wire controller to carry
out the forced operation of the water pump.
Remove air in the circuit as much as possible
using the air purge valves.When there is no
"hissing" pneumatic sound at the vent valve,
close the vent valve on the indoor unit and
exit the forced water pump.
Fill with water until the manometer indicates
a pressure of approximately 1.0~2.0 bar.
Chassis
Mounting
bracket
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Aquantia Hidraulic Kit - KHHP-BI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Aquantia Hidraulic Kit - KHHP-BI in the language / languages: English as an attachment in your email.

The manual is 18.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Aquantia Hidraulic Kit - KHHP-BI

Kaysun Aquantia Hidraulic Kit - KHHP-BI User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info