27299

Kawai CP115 Manual

21
Zoom out
Zoom in
Previous page
1/182
Next page
Basic Controls
P. 15
Effects
You might have noticed that when you select some of the sounds, the LED indicator for the REVERB,
CHORUS, or EFFECTS button is turned on. The reason for this is some of the sounds are set up
with one or more of these effects on as part of their initial setting.
Adding an effect to the sound enhances tonal quality and improves acoustical realism. The CP
piano is provided with three separate groups of effects. The first is REVERB, the second is CHORUS,
and third group EFFECTS contains other useful effects such as Delay, Phaser, Rotary Speaker etc.
There is a dedicated button on the front panel for each Effects group and each of the three Effect
groups can be turned on/off separately or used in combination for each part. The Concert Performer
has a selection of 27 different Reverb, Chorus, and Effect types that can be used to enhance or even
dramatically alter the instrument sounds. Each of the over 600 instrument and drum sounds has
already been assigned a REVERB and CHORUS setting and an additional EFFECT that suits that
particular type of instrument. For example, a moderate Delay effect is used on the Church Organ to
recreate the sense of being in a large church, and a Rotary speaker effect is used on the Drawbar
organ to give it an authentic, vintage feel.
If you wish, you can change any of these effect settings to suit your tastes separately for each sound
save them as the new Preset effect settings for that Sound (See Sound Edit on page 88). In addtion,
by setting the Effect For Sound function in the System to “Panel” the CP will ignore the preset
effect settings for each Sound (see Effect For Sound on page 115).
(The CP piano can also remember your Effect settings as part of a Registration. See Registration on
page 31.)
To add Reverb:
1) Press the REVERB button. The REVERB button LED will light.
2) If you wish to edit the settings, hold down the REVERB button for a moment until the Reverb Settings
screen is displayed.
3) Use the F3-F7 buttons to select the Part you want to edit.
4) Use the L2-L4 buttons to select the specific setting that you wish to change.
5) Use the Dial to change the value.
6) Press the EXIT button to leave the Reverb Settings menu.
7) If you wish to turn the reverb effect off, press the REVERB button again.
REVERB
CHORUS
EFFECT
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kawai CP115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kawai CP115 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info