631825
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
Recorder Connection
Interconnect your recorder and the receiver (VCR socket) by a Scart
cable. If you have a S-VHS-(S-Video) recorder, from the “Installation”
menu select the “Signals” submenu and change the selection (TV Scart
VCR) so that the “YC” signal is connected to the VCR socket.
Recording
To record a current programme set your recorder to Record.
Note that the volume on the receiver is set to full during recording (L 20
on the 7-segment display). This is the only way to obtain the full audio
quality on subsequent playback.
Also make sure that you do not perform any other actions on the receiver
during this direct recording process - anything on-screen displays would
be recorded along with the programme.
With regard to timer recording refer to the “Timer” section.
Playback
Your recorder plays back - i.e. transmits the signal from the VCR to the
TV set - automatically in operation or in Stand-by mode.
The so-called switching voltage of the recorder is detected by the
receiver and the VCR signal is switched through to the TV set.
The 7-segment display shows “VCR”.
You can switch to the receiver channel at any time, even without
stopping playback on your recorder. To do so press the
!
button. To
switch back to the recorder playback, press the
!
button twice.
Note: The
!
button controls the TV switching voltage (pin 8) on the
TV Scart socket. The TV switching voltage is activated when the video
signal from the receiver or from the recorder is switched to the TV set.
In normal mode, without the recorder, you can press the
!
button
to toggle between the receiver channel and another video signal
on the TV.
This additional video signal on the TV might, for example, comes from
your existing “analog” antenna, from a cable connection or from a DVD
player connected directly to the TV.
The listing of video signals available on the TV is dependent on the
specifi cation of your TV set.
In the above operating mode with a recorder during playback,
the
!
button would thus set the video sources of the TV, the recorder
and the receiver one after the other.
Return Path
The video signal described above from the TV set can be returned to
your recorder in Stand-by mode.
If you want to use this function, from the “Installation” menu
select the “Signals” submenu and then choose “VCR signals”.
Open the “VCR signals” menu by pressing the
button.
Activate the “TV -> VCR” input fi eld by pressing
and change the
selection using the

buttons to “ON”. Confi rm your selection
with
.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFT 571 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFT 571 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info