631722
4
Zoom out
Zoom in
Previous page
1/24
Next page
4 from 24
4 from 24
General safety instructions
Caution
Risk of corrosion and explosion of batteries. If your unit is supplied with batteries
(for instance in the remote control), comply with the following points:
Do not expose batteries excessively to sources of heat, direct sunlight or re.
Comply with the safety instructions stated on the batteries:
Replace the batteries only with types that are identical or equivalent, otherwise
the batteries or the unit may be damaged.
Important
Risk of damage to the unit. Please note the following points:
Incorrect connections to the ports
Incorrect connections to the ports can lead to malfunctions or defects on the unit.
Overheating
Comply with the following points, so that the heat generated in the unit is ade-
quately dissipated.
Leave a clearance of at least 10 cm above the unit, 2 cm at both sides of it and
5 cm behind it, unless different values are speci ed in the instructions supplied.
Never install the unit in a cupboard or on shelves with inadequate ventilation.
Never cover or block the cooling slots on the unit or the fan (e. g. with other
equipment, magazines, tablecloths, clothing or curtains).
Do not place any objects on top of the unit.
Do not place the unit close to sources of heat, and do not place naked ames,
such as candles, on the unit!
Do not expose the unit to direct sunlight.
Loss of data and software corruption if the receiver is disconnected from the
mains whilst it is in use
Always switch the receiver into stand-by mode by pressing the stand-by button
(on/off) on the remote control, before disconnecting it from the mains. This ensures
that any data that is new or has been changed will be saved by the receiver.
Long periods of absence or storms
If you are going to be absent for a long time or if there is a storm, always switch
off the unit at the mains (have rst switched it into stand-by mode). Then pull the
plug out of the mains socket, so as to totally disconnect the unit from the mains.
This also applies to other equipment connected to the unit.
We recommend also disconnecting the power cable and the antenna cable from
the unit.
Don't forget any timer settings you have made, especially those to record pro-
grams on the receiver. Switch the receiver on in good time before the recording
is due to start.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFSCONNECT 916 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFSCONNECT 916 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFSCONNECT 916

Kathrein UFSCONNECT 916 User Manual - English - 164 pages

Kathrein UFSCONNECT 916 Quick start guide - German - 24 pages

Kathrein UFSCONNECT 916 User Manual - German - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info