473819
8
Zoom out
Zoom in
Previous page
1/132
Next page
8
Removing or by-passing the fuse in the cable or the receiver is prohibited.
A defective fuse should only be replaced by a fuse with the same rated value!
The following two types of fuses may be used:
F 3A E 32V
F 3A E 125V
There is a risk of re!
Do not switch the receiver off at the on/off switch directly from the operating mode!
This can lead to a loss of data and corruption of the software.
Make sure that the ventilation slots on the unit are not covered in any way.
Otherwise the unit may overheat.
There is a risk of re!
Important Information
The channels available on the satellites and transponders are subject to continual change.
In such cases, it is necessary to reset the channels as the factory preset programming corresponds to
the situation at the date of manufacture. The information for these settings can be found on the Internet
or in relevant magazines.
Your receiver was equipped in the factory with the latest software version at that time. We are, however,
constantly working on adapting the software to the wishes of our customers and to developments
in technology. Further information on this can be found in the sections “Mainmenu - Service Menu”,
“Software Update”.
Please keep the original packaging in case you need to return the product at any time. Receivers are
liable to damage by impacts; they are adequately protected only when in their original packaging. If the
receiver is not shipped correctly the guarantee/warranty on it will be voided.
Before you switch the receiver using the on/off switch, you must switch the remote control into
stand-by mode by pressing the stand-by button (
). In standby mode, any changed or new
data that is broadcast will be saved by the receiver. Once the receiver is in standby mode it can be
fully switched off at any time at the on/off switch at the front of the unit.
On the left hand side of the receiver viewed from the front there is a fuse inserted from the outside.
This fuse needs to be accessible after the receiver has been installed, since access will be necessary if
it needs to be exchanged.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 940sw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 940sw in the language / languages: English as an attachment in your email.

The manual is 17,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 940sw

Kathrein UFS 940sw User Manual - German - 132 pages

Kathrein UFS 940sw User Manual - Dutch - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info