631728
50
Zoom out
Zoom in
Previous page
1/64
Next page
50
Troubleshooting
In the event of a malfunction, rst check all the cable connections and operating states:
1. Receiver and TV set power plugs are connected to wall socket
2. Antenna cables are connected to the receiver input
3. Receiver and TV set correctly connected by a HDMI or Scart cable
4. Audio connections are made to the Hi-Fi or Dolby Digital system as appropriate
5. Receiver and TV set (Hi-Fi/Dolby Digital system) are switched on (check power indicators)
6. Receiver is responding to remote control
A selection of troubleshooting tips is offered below.
Problem Cause Remedy
A “No signal!” warning
appears on some
or all channels
Consult an antenna specialist to
have it checked and repaired as
necessary. Check the settings
made in the “Settings”, “Antenna
& Satellite”, “Tuner Con guration”
menu, and change them if
necessary.
Receiver no longer
responds to the
remote control
The batteries may be at or
inserted incorrectly into the battery
compartment
Check the batteries (see also
“Inserting batteries into the remote
control” in the Operating instructions
– Part 1)
Receiver or remote control
command set may have been
unintentionally changed
Set infrared code 1 as described in
the Operating instructions under
“Main menu - Settings”, “Basic
settings”, “Setting the remote
control”
Wrong time is displayed
“Summer time” setting wrong.
An
incorrect time was imported from the
reception signal
Under “Settings”, “Basic settings”,
“Date and time” in the menu, check
the set time deviation to UTC and
change as necessary. Use the power
switch to switch the receiver off from
the current channel, e.g. Das Erste
or ZDF, wait 10 seconds and then
switch it back on
The following channels
cut out or “No or bad
signal!” appears:
Sport 1, Tele 5, HSE 24
and Sonnenklar TV
DECT telephones operate on the
same frequency as these channels.
Interference may occur due to
inadequate output level or poor
shielding of cable
Consult your antenna specialist
Black or blue screen,
no on-screen displays
Scart connection to TV deactivated
by accidentally pressing the 0 button
Keep pressing the 0 button until the
TV picture reappears on the screen
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 925 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 925

Kathrein UFS 925 User Manual - English - 152 pages

Kathrein UFS 925 User Manual - German - 152 pages

Kathrein UFS 925 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info