631728
20
Zoom out
Zoom in
Previous page
1/64
Next page
20
Connection and set-up
DiSEqC™ repeat:
The setting for how often the DiSEqC™
command must be repeated depends
on the con guration of your reception
system.
- Off DiSEqC™ command is not repeated
- 1 DiSEqC™ command is repeated once
- 2 DiSEqC™ command is repeated twice
- 3 DiSEqC™ command is repeated three times
22 kHz control:
You only need to specify this data if your LNB type is “Simple”. The 22 kHz signal is needed to switch LNBs
when using multi-feed reception and to switch between Low and High band.
- On
- Off
Test Transponder:
Select the “Test Transponder” eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
When you have completed all settings for this satellite, press the
(green) button.
If you have selected more than one satellite (max. four) for Tuner 1, the receiver will automatically skip
to the settings for the second satellite. Now de ne the settings for the second satellite, followed by the
third and fourth satellites as required, in the same way as described for the rst satellite.
Once all settings for all the satellites that you selected have been completed, the receiver will
automatically skip to the settings for the second tuner (assuming that for the second tuner you selected
the connection type “Separated” and set the signal con guration to “Different from Tuner 1”). If this is the
case, now de ne the settings for the second tuner in the same way as you did for the rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the rst installation with the
“Channel Search” section.
Refer to the documentation for
your reception system or seek
assistance from a specialist
engineer.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 925 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 925

Kathrein UFS 925 User Manual - English - 152 pages

Kathrein UFS 925 User Manual - German - 152 pages

Kathrein UFS 925 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info