631727
19
Zoom out
Zoom in
Previous page
1/64
Next page
19
- Universal
- Simple or
- User-def ned
If you do not use a Universal LNB, press the
button. You can now make the settings for your
LNB type (simple or user-def ned).
LNB Frequencies (MHz):
Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the
button to save the
new values.
DiSEqC™ Repeat:
The setting for how often the DiSEqC™ command must be repeated depends on the con f guration of your
reception system.
- Off DiSEqC™ command is not repeated
- 1 DiSEqC™ command is repeated once
- 2 DiSEqC™ command is repeated twice
- 3 DiSEqC™ command is repeated three times
Test-Transponder:
Select the “Test-Transponder” f eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
When you have completed all settings for this satellite, press the
button.
If you have selected more than one satellite (four max.) for Tuner 1, you can now de f ne the settings as
described above for the f rst satellite, for the second satellite and then for the third and fourth satellites,
if selected.
When you have completed all settings for Tuner 1, press the
(green) button.
If necessary, the receiver will automatically skip to the settings for the second tuner (assuming that for
the second tuner you selected the type of connection “Separated” and set the signal con f guration
to “Different from Tuner 1”). If this is the case, you should now de f ne the settings for the second tuner
in the same way as you did for the f rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the f rst installation with the
“Channel Search” section.
Connection and setup
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.
Refer to the documentation for
your reception system or seek
assistance from a specialist
engineer.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 924 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 924 in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 924

Kathrein UFS 924 User Manual - English - 164 pages

Kathrein UFS 924 User Manual - German - 164 pages

Kathrein UFS 924 User Manual - German - 64 pages

Kathrein UFS 924 User Manual - French - 164 pages

Kathrein UFS 924 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info