509593
150
Zoom out
Zoom in
Previous page
1/156
Next page
150
TROUBLESHOOTING
In the event of a malfunction, rst check all the cable connections and operating states:
1. Receiver and TV set power plugs are connected to the wall socket
2. Antenna cables are located on the receiver input
3. Receiver and TV set correctly interconnected by a Scart or cinch cables
4. Audio connections are made to hi- or Dolby Digital system as appropriate (see previous page)
5. Receiver and TV set (Hi-Fi/Dolby Digital system) are switched on (check power indicators)
6. Receiver is responding to remote control
A selection of troubleshooting tips is offered below.
Problem Cause Remedy
“No signal!” warning
appears on some or all
channels
Antenna signal of satellite
reception system missing or faulty.
Incorrect oscillator frequencies
set in “LNB Con guration” menu.
Only one cable connected from
the satellite system
Consult an antenna specialist to have
it checked and repaired as necessary.
On “Installation” menu check LNB
con guration for satellite in question:
High L.O. “10.600” GHz and Low L.O.
“9.750” GHz, and change as necessary.
Connect tuner input “LNB2 IN” with
second cable (connect coaxial cable
with F connection) of satellite socket.
OR: On “Installation” menu change LNB
con guration tuner input to “#1” (if only
one satellite being received)
Remote control no longer
responding
Receiver or remote control
command set may have been
unintentionally changed
Set infrared code 1, as described in
operating manual under “Remote
Control RC 660”; check batteries
Wrong time being
displayed
The “Summer Time” setting is
wrong. An incorrect time was
imported from the reception
signal
On “System set-up” - “Time set-up”
menu check “Summer Time enabled”
and change as necessary. Switch
off receiver at mains switch from
current channel, e.g. ARD or ZDF, wait
10 seconds and then switch back on
The following channels cut
out or “Poor signal or no
signal!” appears: ProSieben,
SAT1, Cable 1, DSF, N 24,
Tele 5, 9 Live, HSE 24 and
Sonnenklar TV
DECT telephones are operating
on the same frequency as these
channels. Interference may occur
due to inadequate level or poor
shielding of cable
Consult your antenna specialist
Black or blue screen, no
on-screen displays
Scart connection to TV deactivated
by accidentally pressing the 0
button
Keep pressing the 0 button until the TV
picture reappears on-screen
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 822si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 822si in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 822si

Kathrein UFS 822si User Manual - German - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info