509593
17
Zoom out
Zoom in
Previous page
1/156
Next page
17
FIRST INSTALLATION
Note: If you are unsure whether
you chose the right
option from a previous
menu, you can go back
a step at any time during
the First installation
process by pressing
the
(red) button.
Press the

buttons here to select the connection type and signal con guration for the tuners set on
the receiver by you or the engineer.
You have the following options:
Installed system
- “LNB/DiSEqC™ System”: Conventional satellite reception (simple digital satellite system)
- “Single-cable system”: Satellite reception using a “single-cable system” (functions at present only using
a single cable system from Kathrein!)
Connection type for tuner 2
- “Separated”: Tuner 2 (input) has its own signal input, i.e. a direct connection between the antenna socket
and the tuner 2 input
- “Loop-through”: The signal currently connected to the tuner 1 loop-through output is looped-through to
tuner 2 (input). Refer also to the section headed “Operation on one Antenna Connection”
Signal con guration for tuner 2 (only in “Separated” connection type)
- As for tuner 1: Both tuners are connected to the same signal source (same cable from LNB)
- Different from tuner 1: The two tuners are connected to different signal sources (separate cables
from LNB)
Press the
!
(green) button to move to the next menu. The notes on the subsequent First Installation
menus are divided into two columns. The left-hand column indicates the further installation
procedure for the “Same with tuner 1”, signal con guration, while the right-hand column details the
“Different to tuner 1” procedure. If your reception system is a “Single-cable” system from Kathrein,
continue the First installation as described on page 25.
The satellites shown in the following screenshots are factory preset. To be able to
receive the satellites you want, your system must be aligned to them!
The following display appears:
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 822si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 822si in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 822si

Kathrein UFS 822si User Manual - German - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info