631772
17
Zoom out
Zoom in
Previous page
1/72
Next page
17
Satellites and position
Use the

buttons to set the desired satellite
(selection from 17 pre-programmed options).
LNB settings
Here use the

buttons to select the LNB
type used in your system. The choice is between
“Universal” and “User-de ned”.
Universal:
No further input required, since all necessary
frequency ranges are covered by a universal LNB.
User-de ned:
If you choose not to use a universal LNB, you must
here set the frequency ranges for which your LNB
was con gured.
Use the

buttons to select the frequency
range to be changed (low, high or limit frequency).
Use the

buttons or the digital input
buttons to set the exact frequency for which your
LNB was con gured.
Test transponder
To check whether the settings that you have
made are correct, use the

buttons
to move to the “Test transponder” eld.
Use the

buttons to select the required
transponder from the various ones listed. If your
settings are correct, you will see at the top right of the
screen the live signal of a channel for the currently
selected transponder.
If you are not receiving a signal, check your
settings again and if necessary call for expert
help.
You have now completed all settings for the rst
satellite. Press the
button to return to the
“Satellite Selection Menu” and perform the settings
in the same way for the remaining satellites.
The notes on rst installation are uni ed once again from this point!
When you have nished con guring the satellite press
!
(green) button. The receiver then automatically
calls up the selection menu for the channel search.
FIRST INSTALLATION
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 712 in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 712

Kathrein UFS 712 User Manual - Dutch - 72 pages

Kathrein UFS 712 User Manual - French - 72 pages

Kathrein UFS 712 User Manual - Turkish - 72 pages

Kathrein UFS 712 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info