631772
9
Zoom out
Zoom in
Previous page
1/72
Next page
9
CONNECTION AND SET-UP
The following section is intended speci cally for specialist dealers. You only need to pay attention to this
section if you are carrying out the installation yourself.
The “Connection examples” section provides a sample con guration.
Do not connect the unit to the mains until all installation work has been properly carried out. Refer to the
information in the “Safety instructions” section.
Connect the Sat IF inputs on the receiver to the satellite reception system. Use
a coaxial cable with a standard F connector.
If the F standard connectors are not yet tted on the cable, strip the insulation from
the cable as shown in the following illustration and carefully twist the F standard
connectors on to the ends of the cables until they are securely seated.
When tting the connector, make sure that no wires from the braid are touching
the inner conductor, so no short circuit can occur.
The quality of the reception signal depends on the connection!
The presets for the control signals have been made for standard reception systems, i.e. 14/18 V for
polarity reversal and 22 kHz switching signal for low/high band changeover on multi-feed reception
systems.
CONNECTING THE UNIT (SAT-IF CONNECTIONS)
RECEPTION REQUIREMENTS
Make sure that your own satellite antenna system is equipped at least with
a universal LNB for digital reception in the high-band range.
RECEPTION SYSTEM PRESETS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 712 in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 712

Kathrein UFS 712 User Manual - Dutch - 72 pages

Kathrein UFS 712 User Manual - French - 72 pages

Kathrein UFS 712 User Manual - Turkish - 72 pages

Kathrein UFS 712 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info