631719

Kathrein UFS 641si Manual

55
Zoom out
Zoom in
Previous page
1/84
Next page
55
SEARCH CHANNELS (CHANNEL SEARCH)
The

buttons allow you to select different sets of parameters for the search.
Satellite
Use the

buttons to select the satellite on which the transponder you want to search is located.
Make sure your reception system is aligned to the selected satellite. You can search only one
transponder at a time. If you want to search several transponders on a satellite, you should start an
automatic search of the transmitting satellite.
Press the
button to move to the next selection item.
Transponder Frequency
Select the transponder to be scanned, using the

buttons or the number pad. At the bottom
right of the on-screen display, the receiver shows the current signal strength and signal quality of
the selected transponder. Press the
button to move to the next selection item.
Channel Search Mode
Use the

buttons to select whether you want to search “free & scrambled” or “only free” channels.
Press the
button to move to the next selection item.
Network Search
Use the

buttons (On/Off) to select whether a network search should be performed. If you set
the “Network Search” to “Off”, only the factory stored transponders of the satellites you previously
selected will be searched for new as yet unlisted channels.
If you set the “Network Search” to “On”, the transponder network enables additional transponders that
have not yet been stored to be located. They are then stored and searched for new channels in the
same way as the existing transponders.
When you have made your settings, use the

buttons to select “Start Search” and press the
button to start searching. You can cancel the search at any time by pressing the
button.
During the search you will see an on-screen display that shows you the progress of the search and
the channels found so far. Newly found channels are identifi ed with the designation “New” after the
channel name.
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 641si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 641si in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 641si

Kathrein UFS 641si User Manual - German - 84 pages

Kathrein UFS 641si User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info