631719
10
Zoom out
Zoom in
Previous page
1/84
Next page
10
CONNECTION AND SETUP
The following section is intended speci cally for specialist dealers. You need not refer to this section
unless you are carrying out the installation yourself.
The “Connection examples” section provides a sample con guration.
Do not connect the receiver to the power supply until all installation work has been properly carried out.
Refer to the information in the “Safety Instructions” section.
Connect the Sat IF input on the receiver to the satellite reception system. Use a
coaxial cable with a standard F connector.
If the F standard connectors are not yet tted on the cables, strip the insulation
from the cables as shown in the following illustration and carefully screw the
F standard connectors on to the ends of the cables until they are securely attached.
When tting the connector, make sure that no strands of the braid are touching
the inner conductor, otherwise a short circuit will occur.
The quality of the reception signal depends on this connection!
The presets for the control signals have been made for standard reception systems, i.e. 14/18 V for
polarity reversal and 22 kHz switching signal for low/high band changeover on multi-feed reception
systems.
CONNECTING THE UNIT (SAT IF CONNECTIONS)
RECEPTION REQUIREMENTS
Make sure that your own satellite antenna system is equipped at least with a
universal LNB for digital reception in the high-band range.
RECEPTION SYSTEM PRESETS
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 641si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 641si in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 641si

Kathrein UFS 641si User Manual - German - 84 pages

Kathrein UFS 641si User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info