424422
70
Zoom out
Zoom in
Previous page
1/80
Next page
Data Transfer from Receiver to Receiver
70
Data Transfer from Receiver to Receiver
Your receiver is able to receive the RS232C socket data from another
receiver. Here, both receivers must be connected via a so-called
'zero modem cable.' The transmitting receiver is in this case the mas-
ter and the receiving receiver is the slave.
Preparation
The master and slave are first switched to standby mode and then
disconnected from the mains by pressing the power switch.
The data sockets of both receivers are connected with the zero mo-
dem cable.
The master is then switched on again.
Transferring channel lists
Simultaneously press the button (arrow left) and “SELECT” under
the front panel of the master to transfer the channel list.
The slave can now be switched on. The transfer procedure begins.
While loading, the display of the master shows "t001 t002 .. t00n
while the slave correspondingly shows "r001 r002..r00n“.
The LED display displays "----" during block transmission.
The loading procedure was successful, if both receivers show the
message "Succ."
Transferring operating software
Follow the same procedure as described above for the purpose of
transferring operating software.
Start the transfer of the operating software by simultaneously pressing
the button (arrow right) and “SELECT” under the front panel of
the master.
While loading, the display of the master shows "t001 t002 .. t00n
while the slave correspondingly shows "r001 r002..r00n“.
The LED display displays "----" during block transmission.
The loading procedure was successful, if both receivers show the
message "Succ." Should transfer problems occur, "F * * *" will appear
in the master display where * stands for a numerical value. In this
case, check the cable connection and start a new transfer attempt.
The data transfer from receiver to receiver as described above
must only be carried out with devices of the same type as other-
wise malfunctions or total loss of the operating software may oc-
cur.
On no account must the receivers be switched off or the connection
interrupted during data transfer. This may otherwise result in data
loss, malfunctions or total failure of the operating system.
Always wait until the "Succ." or "F * * *“ message appears on the dis-
play.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein ufd 540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein ufd 540 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein ufd 540

Kathrein ufd 540 User Manual - German - 80 pages

Kathrein ufd 540 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info