631743
9
Zoom out
Zoom in
Previous page
1/50
Next page
Connecting up and putting into operation
9
Secondary receiver connection
You can connect an analogue secondary receiver to your digital receiver.
For this, connect the Sat IF input of the secondary receiver to the Sat IF output
of your digital receiver.
Connect the AUX Scart socket of your digital receiver to the TV Scart socket of
the secondary receiver.
For correct operation, the unused receiver must be in standby mode.
It is essential to comply with the secondary receiver‘s instructions.
The schematic for connecting-up the secondary receiver is to be found in the
“Connection examples“ chapter.
Switching over remote control’s command set
The remote control handset contains two command sets. This allows two receivers
to be operated independently in a room (not in conjunction with a twin receiver).
Switchover is possible with all Kathrein remote control handsets.
For this, programme one receiver to command set A and the second receiver to
command set B.
Switch on receiver 1. Switch off receiver 2 using the mains switch on the unit.
Press the
key and keep it pressed.
Using the numeric keys
to enter “901“.
To adopt the code, switch receiver 1 into standby using the
(standby) key,
and then to off via the mains switch on the unit.
Set receiver 2 back into operation.
Press the
key and keep it pressed.
Using the numeric keys
to enter “902“.
To adopt the code, switch receiver 2 into standby using the
(standby) key
and then back into operation again. Set receiver 1 back into operation as well.
Press the
key and keep it pressed.
Using the numeric keys
to enter “903“.
With the first two settings the remote control must be pointer towards the
respective receiver which is switched on.
With the
key you can now switch between the two command sets A and B
(toggle function) and operate the two receivers in alternation.
Operate only one receiver. If, due to maloperation, the active command set has
been switched over rendering the receiver inoperable, the remote control can be
switched back to command set A without difficulty. The procedure for this has
already been described above.
With remote control handsets that have 24 keys (remote controls of the 200-series
receivers from Kathrein) code numbers 001, 002 and 003 are to be entered in
place of codes 901, 902 and 903.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFD 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFD 510 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFD 510

Kathrein UFD 510 User Manual - German - 48 pages

Kathrein UFD 510 User Manual - French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info