629516
75
Zoom out
Zoom in
Previous page
1/80
Next page
Manual Lowering to Park Position
75
1. A plastic cover is located in the centre of the axis
(see arrow). Lever this off with a narrow slotted
screwdriver.
2. Behind the cover is an M8 hexagon head screw.
Unscrew it using a socket wrench, size
13 mm
.
After removing the M8 screw, a further thread can be
seen.
3. Attention! Secure and support the antenna to prevent
it tipping over. The connection to the rocker can
suddenly come loose during the next step (point 4).
It is then no longer connected to
the
turntable.
4
. Screw an M12 screw into this thread (minimum
length: 22 mm)
. You will need a
socket wrench for
this (size: 19 mm
).
Screwing in the M12 screw
removes the rocker from the tapered shaft and
releases the catch.
5.
Tilt the antenna into park position (horizontal position).
6. Remove the M12 screw. T
his replaces the
rocker on
the tapered shaft.
7. Replace the M8 screw and tighten it
.
8. Replace the plastic cover.
Removing the rocker from the tapered shaft moves the
position of the rocker zero point. An authorised dealer
should eliminate this defect and calibrate the rocker.
9
. Consult an authorised dealer.
Manual Retraction
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFD 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFD 170 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info