629516
62
Zoom out
Zoom in
Previous page
1/80
Next page
Connection Diagram
62
SAT-ZF Connection
The coaxial cable coming from the antenna is connected to the SAT-IF
input on the UFD 170. The SAT-IF output on the UFD 170 control unit is
already connected to the SAT-IF input on the UFD 170 receiver with the
coaxial cable supplied. The correct sequence must be observed due to
the power supply for the LNB (via coaxial cable) and communication
between the two boards in the UFD 170 (control unit and receiver).
On-Board Network Connection
In terms of the on-board network connection, refer to the
information in the installation manual for the CAP 210/310.
The power supply cable supplied (wires: brown/white/green) is
connected directly to the battery (battery strip before fuse). The
brown wire is connected to “+”, the white wire to “-” and the green
wire to the ignition behind the ignition lock, so that it is under
power as soon as the ignition is switched on. Make sure that the
“+ 12 V”, “earth” and “ignition” wires cannot be interrupted by switches
connected in series, as this can disable the function for automatic
lowering of the antenna.
The green connection is important as it is the only way to ensure that
the turntable moves to park position when the ignition is switched on.
This prevents driving with the antenna extended.
If the supply voltage is too low, the UFD 170 receiver displays the OSD
message “On-board voltage too low”. If the on-board voltage is too low,
other error messages can also appear (e.g. “Overload”, even though
there is no overload).
Control Cable
The control cable for the turntable is connected to the UFD 170 (see
previous page).
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFD 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFD 170 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info