631816
85
Zoom out
Zoom in
Previous page
1/128
Next page
85
The receiver automatically starts playing back the recording. You now have several options for specifying
the range to be cut (see example bar):
To set the exact times for the start and end markers as quickly as possible you can use various buttons as
aids:
- Use the

buttons to rewind or fast forward at up to 24 times playback speed (you can only fast
forward recordings which have not yet decoded at 4 times playback speed and rewind them at 2 times
playback speed)
- You can use the
button to pause the playback and view a freeze-frame (pressing the
button starts
the slow motion forwards wind (7 steps obtainable by repeatedly pressing the
button))
- Use the

buttons to jump forward or backwards in 30-second blocks
Cut the range marked “Start” as follows:
- Move to the end of the range you want to cut and press the
button. Then press the
!
(green) button
to set the start point marker of the range to be cut. The receiver automatically marks the full range back
to the start of recording. Then press the
(red) button to set the end marker at the end of the recording
range you want to cut.
Cut the range marked “Middle” as follows:
- Move to the start of the range you want to cut and press the
button. Then press the
(red) button
to set the start marker and move forward to the end of the cut range. Press the
button again and
the
(red) button to set the end marker.
Cut the range marked “End” as follows:
- Move to the start of the range you want to cut and press the
button. Then press the
(red) button to
set the start marker and press the
!
(green) button to automatically select the full range to the end of the
recording.
Press the
(red) button to cut the marked range from the recording, or press the
!
(green) button to reset
the markers.
Start Middle End
RECORDING LIST
You can only remove one block from the recording in each cut operation. To remove
multiple blocks you have to repeat the process.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFC 861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFC 861 in the language / languages: English as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info