473812
14
Zoom out
Zoom in
Previous page
1/36
Next page
14 / 36
Attach the carrier arm to the antenna boom, as shown on the
drawing. Alternately tighten the wing nuts on the mast clip nger-
tight ().
c) Installing the carrier arm
d) Installation of the parabolic antenna
Now hang the parabolic re ector from the four securing bolts on
the carrier arm (see the diagram on the right) ().
• Now lightly tighten the four bolts using the allen wrench (do this
by holding the allen wrench by the short end, see diagram on the
right) ().
Now turn the allen wrench round. If you now swing the long end
of the hexagon key (see diagram on the right) through about a
quarter of a turn, the bolts will be tight. If you have a torque
wrench available, tighten the bolts to about 4-5 Nm ().
Only tighten slightly!
First only tighten
slightly...
...then turn
through about a
quarter of a turn
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein RCU 672 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein RCU 672 in the language / languages: English, German as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info