631835
48
Zoom out
Zoom in
Previous page
1/64
Next page
48
TECHNICAL APPENDIX
32 Elevation positioner
33 Combined positioner
34 LNB positioner
40 Installation aid
41 Signal strength adjustment help
60 Reserved for allocated addresses
70 “Intelligent slave interface” for “Proprietary Multi-Master bus”
71 Interface for nodes and controlled head-ends
Fx OEM add-on
COMMAND OVERVIEW FOR COMMAND BYTE
The device can send out commands based on DiSEqC
TM
1.0/1.1/1.2
but not receive them. All commands that require DiSEqC
TM
(send
and receive) are greyed out in the table.
Commands shown in bold are preferred for Kathrein switching
matrices.
Hex Byte Command
designation
Description Number
of data
bytes
00 Reset Reset DiSEqC
TM
microcontroller -
01 Clr Reset Clear reset ag -
02 Standby Power off peripheral power unit -
03 Power on Power on peripheral power unit -
04 Set Contend Set the contention ag -
05 Contend Response only if the contention ag has been set -
06 Clr Contend Delete the contention ag -
07 Address Response only if the contention ag has not been set -
08 Move C Change address if the contention ag has been set 1
09 Move Change address if the contention ag has not been set 1
10 Status Read status register ags -
11 Con g Read the con guration ags -
14 Switch 0 Read the switching status ags (committed port) -
15 Switch 1 Read the switching status ags (uncommitted port) -
16 Switch 2 Expansion option -
17 Switch 3 Expansion option -
20 Set LO Call the low local oscillator frequency -
21 Set VR Call up the vertical polarisation or clockwise
circular polarisation
-
22 Set Pos A Select satellite position A -
23 Set S0A Select switch option A -
24 Set Hi Call up the high local oscillator frequency -
25 Set HL Call up the horizontal polarisation or anti-clockwise
circular polarisation
-
26 Set Pos B Select satellite position B -
MANUAL SETTING OF THE ANTENNA
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MSK 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MSK 120 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MSK 120

Kathrein MSK 120 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info