473816
11
Zoom out
Zoom in
Previous page
1/60
Next page
11
When selecting the installation position, take into account the range of movement of the turntable
(see the grey shaded area in the graphics). Within this grey area there must be no structures on
the roof that would obstruct this movement (risk of collision). For safety, keep at least the required
area of 1024 x 1250 mm free (for ease of installation and any subsequent dismantling).
INSTALLATION AND CONNECTION
Choose an installation position on the roof that is as at as possible: depending on the location of
the vehicle, roof pitches greater than 5° may lead to problems when searching for the satellite.
To ensure secure adhesion, the height difference of the roof curve may not be more than 1 cm over
a length of 2 m, as otherwise the gap between the roof and the mounting plate would be too great
to be lled by the adhesive sealant.
As the vehicle is constantly subjected to vibration loads during travel, the roof below the antenna unit
is also subject to signi cant loads. Please note given the nature and capacity of your vehicle roof
(see also operating manual for the vehicle) that the weight of the antenna unit is approx. 19 kg.
In case of doubt, consult a quali ed dealer or your vehicle’s manufacturer.
The roof gland provides a watertight seal through which the three connection cables (2 x coax
cables, 1 x power supply cable) are fed into the interior of the vehicle directly underneath the
turntable. If you prefer a different method of laying the cables, they can be run from the rear of the
turntable via the channel provided in the mounting plate. The cables must then be run along the
roof of the vehicle in a protective cable duct (not supplied). For the roof gland, use the HDZ 100
(BN 20410032) sealant available from specialist dealers as an accessory.
Note: Do not cut the cables short, as otherwise the proper functioning of the unit can no longer
be guaranteed.
Turntable movement range with
antenna, viewed from above onto
the vehicle roof.
Roof attachments may
be mounted within the
hatched area.
Safety clearances should be
maintained from the roof
attachments (e.g. due to
build-up of ice)
Direction of travel
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MobiSet 4 digitaal CAP 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MobiSet 4 digitaal CAP 910 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MobiSet 4 digitaal CAP 910

Kathrein MobiSet 4 digitaal CAP 910 User Manual - German - 60 pages

Kathrein MobiSet 4 digitaal CAP 910 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info