473815
25
Zoom out
Zoom in
Previous page
1/68
Next page
25
Lay the coaxial cable to the UFS 940sw.
Lay the turntable power supply cable (3-pin plug) to the battery.
Avoid laying the cables across sharp edges and secure the cables against possible cha ng points.
Connect the coaxial cable (coming from the turntable) to the “IF IN” F socket on the rear of the
UFS 940sw.
Place the infrared sensor for the receiver close to or directly on top of the TV set and lay the cable to
the UFS 940sw. Connect the 6-pin Western connector at the rear to the socket marked “IR REMOTE IN”
(see also “Installation of the UFS 940sw receiver” in this section).
Isolate the on-board power supply (master switch “off” or disconnect the positive pole of the on-board
power supply battery) before commencing the following work:
Connect the power cable supplied (depending on the power supply available in your motor home or
caravan, either a 12 V supply or a 230 V supply via a power supply unit) to the “
” socket
on the receiver.
Make sure that the “inline” integrated fuse (5 A) of the cable is fully plugged in and is intact. If the fuse
blows, the source of the fault must rst be eliminated. The fuse must only ever be replaced by a fuse
with the same rating (5 A).
Note: Lay the Cinch cable supplied with the CAP 710. Take great care to plug the cable into the
correct socket!
CONNECTING TO THE UFS 940SW
LAYING CABLES AND CONNECTING THE TURNTABLE
INSTALLATION AND CONNECTION
The receiver must be connected to no other power supply than 12 V DC.
The receivers earth connection must be connected to the negative pole of the
motor home or caravan battery.
At the connecting point for the power cable, the voltage must not fall below 10.9 V even with a load
of 12 A. Otherwise optimum functioning can no longer be guaranteed.
Connect the power cable to the respective socket in your motor home or caravan (12 V or 230 V).
The fuses in the cable and in the receiver must never be by-passed – cable re
hazard!
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MobiSet 3 digitaal CAP 710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MobiSet 3 digitaal CAP 710 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MobiSet 3 digitaal CAP 710

Kathrein MobiSet 3 digitaal CAP 710 User Manual - German - 68 pages

Kathrein MobiSet 3 digitaal CAP 710 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info