631713
12
Zoom out
Zoom in
Previous page
1/52
Next page
12 of 52
Installation and Connection
5 Installation and Connection
5.1 Installing and Connecting the Turntable
5.1.1 Required Tools and Equipment
Circular cutter, Ø 38mm
Flat-bladed screwdriver for M5 screws
Power drill
The following screws, depending on the roof structure:
galvanised round head screws, Ø 5mm, sheet metal
screws D7981 or
round head screws D7985 with washers and nuts
Twist drill, Ø 2.5 or 5.5mm
Round le and/or emery paper
Cleaning agent
Open-ended or ring spanners 10 and 11 mm across ats
Knife
Cross-head screwdriver for M3 and M5 screws
Torque wrench capacity 6 to 11Nm
Hexagon socket key, 5 mm
Two wooden beams for supporting the turntable
5.1.2 Unpacking and Preparing
WARNING
Risk of injury due to the heavy weight of the package!
The turntable together with the parabolic reector weighs close to 20 kg.
If necessary, please seek help from a second person when unpacking and installing the turntable.
NOTICE
Risk of material damage during transportation!
Never pick up or carry the turntable by the planar antenna.
Unpacking the Turntable
1. Pull the turntable out of the packaging as shown in the illustration below.
2. Remove the packing pieces from the turntable
before transporting it to the roof of the vehicle.
3. Loosen the 6 fastening screws (spanner size: 10mm) which attach the turntable to the mounting plate.
4. Carefully lift the turntable off the mounting plate and place it onto the two prepared wooden supports. When doing
this, make sure that the cables are not crushed where they emerge from the underside of the turntable.
1
Tip
Retain the original packaging, because if it is necessary to send the unit for repair, transport damage cannot
be ruled out and the manufacturer accepts no liability for possible damage.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 950 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 950 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 950 - MobiSet 3 Twin

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - English, German - 1 pages

Kathrein CAP 950 - MobiSet 3 Twin User Manual - German - 52 pages

Kathrein CAP 950 - MobiSet 3 Twin Additional guide - Dutch, French, Italian, Turkish, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info