631714
10
Zoom out
Zoom in
Previous page
1/56
Next page
10 of 56
Safety Instructions and General Guidelines
Using the cable core marked Ignition, the power supply cable is connected to the ignition current circuit. This way, the
turntable has a function for automatic lowering of the antenna. The lowering takes place as soon as the vehicle ignition
circuit is turned on.
When connecting the control unit to the on-board power supply, make sure that the 12V, Earth and Ignition wires
cannot be disconnected by intermediate switches, as this could deactivate the automatic lowering function.
The antenna is lowered within 5 seconds of the ignition being switched on, even if the CAP converter is switched off.
The control unit is lowered immediately. Lowering the antenna after the ignition is switched on can take up to
30seconds and it only functions if the turntable is connected to a 12V power supply and to the ignition.
Checks before Commencing a Journey
Before commencing a journey, always lower the antenna into the horizontal position (park position).
If the antenna has collided with a xed or movable object, check if the system is still securely attached.
As the antenna is subjected to vibration loads during driving, check at regular intervals, depending on the frequency
of driving, whether the system is still securely attached and tighten any parts that have worked loose.
Do not exceed the maximum permissible speed of 130km/h for vehicles with a receiver unit mounted on the roof.
Lower the antenna if it will not be used for a long period. This makes the securing bolts more difcult to access
(protection against theft).
Antenna in the Park Position whilst Driving
Always lower the antenna into the horizontal position (park position) whilst driving. To remind yourself of
this, place the sticker from the supplementary sheet CAP750 Lowering the antenna while driving in the
visual range of your vehicle ignition switch.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 750 - Mobiset 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 750 - Mobiset 3 Twin in the language / languages: English as an attachment in your email.

The manual is 9,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 750 - Mobiset 3 Twin

Kathrein CAP 750 - Mobiset 3 Twin User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info