631709
17
Zoom out
Zoom in
Previous page
1/64
Next page
17 from 64
Version with external cable gland
The external roof gland is arranged so that it forms a watertight enclosure on the vehicle roof around
the point where the three cables projecting from the turntable are connected to the two extension cables
within the interior of the vehicle, and where if necessary they can be disconnected (see Fig. F).
Arrange the cables in the cable duct when placing the turntable on to the mounting plate. Make sure
that the cables are not crossed over and that they are taut so that they cannot be crushed. Do not try to
pull the cables from the unit. This could damage the cables or loosen the cable connections.
Place the turntable carefully on the mounting plate. The through holes on the turntable must be perfectly
aligned with the threaded holes on the mounting plate.
Apply a little adhesive sealant to the six threaded holes in the mounting plate and screw the fastening
screws into the thread. Tighten the screws to a torque of 6 Nm.
When feeding the cables through the HDZ 100 roof gland, make sure they are not crushed, kinked or
damaged.
Fig. F
Cables laid in the cable duct
*
)
and
watertight roof gland
*
)
*)
Notincluded!TheHDZ100roofglandisavailableasanaccessoryunderpartnumber20410032fromspecialist
dealers.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 730 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 730 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 730 - MobiSet 3 Twin

Kathrein CAP 730 - MobiSet 3 Twin User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info