631831
22
Zoom out
Zoom in
Previous page
1/68
Next page
22
Using the adhesive strips supplied, now
install the infra-red sensor either on the
receiver or at the chosen location. If the
infra-red sensor is installed on the unit,
its cable can be threaded in at its base,
as for a phone, and routed to the rear of
the receiver (see diagram on the right).
When threading in the
cable, take care not to
damage its sheath.
INSTALLATION AND CONNECTION
Use of other screws:
If because of the installation location or
factors associated with it, the screws
supplied cannot be used, refer to the
diagram alongside when selecting the
screws to be used. This shows you the
cross-section area of the screw sockets
on the receiver and shows which screws
(diameter, screw head pro les etc.) can
be inserted into the receiver support.
IMPORTANT INSTRUCTIONS FOR INSTALLATION
Under no circumstances use countersunk-head screws for
installation (see diagram on the right), since these can damage the
screw sockets on the receiver. Wherever possible, use the wood
screws supplied with the receiver.
Before installing the receiver so that it is attached to another piece
of equipment (such as a TV set), check with the manufacturer of that
equipment or by reference to the documentation supplied with it
whether this is permissible, and if so what ttings (screws etc.) you
need/can use for this. The temperature rise of each of the units in
operation (receiver/TV set) can in some circumstances affect the other unit.
The wood screws supplied with the receiver should not under any circumstances
be used to attach it to a TV set or other electrical equipment! This could damage
that equipment, possibly beyond repair.
Risk of fatal injury due to electric shock!
6.6
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 720 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 720 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 720 - MobiSet 3 Twin

Kathrein CAP 720 - MobiSet 3 Twin User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info