631715

Kathrein CAP 650 - MobiSet 3 Twin Manual

45
Zoom out
Zoom in
Previous page
1/56
Next page
45 of 56
12 DEKYsylMS Technical Data Sheet
TECHNICAL DATA SHEET
DEKASYL MS-5 HIGH TACK ADHESIVE & SEALANT
PRODUCT
Dekasyl MS-5 is a MS Polymer based adhesive with a high green strength and is suitable for making elastic
constructive joints. Due to its high green strength clamping times can often be reduced or clamps are not needed
anymore. Dekasyl MS-5 can also be used as sealant, if similar material (similar stiffenesses) are joined together,
or if mechanical fastening methods are used.
APPLICATIONS
Elastic bondings and sealings in e.g. bus-, train-, caravan-, camper and truck construction.
Bonding of windows in e.g. busses and trains.
Bonding of corner profiles of aluminium or polyester on trailers.
Bonding of polyester parts on metal frames.
FEATURES
Solvent-, isocyanate- and PVC free.
Very good UV-resistance and ageing properties.
In general good adhesion on several substrates without the use of a primer.
Permanent elastic within temperatures from –40°C till +120°C.
Neutral, odourless and fast curing.
Paintable after skin forming (wet on wet); this will in general not influence the curing speed.
Paint compatible with most industrial paint- or lacquer systems, both alkyd resin and dispersion based
(due to the large scale of different types of industrial paints a paint compatibility test is recommended!)
ADHESION
In general Dekasyl MS-5 adheres well without primer on clean, dry, dust- and grease free substrates of
aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder coated metal, most lacquered metal
surfaces, glass, PVC, polyester (GRP), painted and lacquered wood, etc. No adhesion on untreated
polyethylene, polypropylene and teflon. In those cases where due to great thermal or physical loads, especially
under wet conditions, high adhesion demands are needed, the use of an adhesion promotor is recommended.
For not mentioned substrates and additional information consult Dekalin
.
METHOD OF USE
Dekasyl MS-5 can easily be extruded with a hand- or air pressure gun at temperatures between +5°C and 35°C.
In sealing applications Dekasyl MS-5 should be tooled or smoothened within 12 minutes (at 20°C/50%R.H.) with
a spatula or putty knife, occasionally moistened with a mild soap solution. Avoid soap solution penetrating
between joint sides and sealant, because this will create loss of adhesion. In bonding applications the substrates
have to be assembled within 15 minutes (at 20°C/50%R.H.) after applying Dekasyl MS-5. The higher the
temperature, the shorter the open time will be! In general an adhesive thickness of 2 mm is recommended if
similar materials (similar stiffenesses) are bonded. The larger the difference in thermal expansion is, the thicker
the adhesive bead should be. For more details Dekalin should be consulted. At a temperature of 20°C and a
relative humidity of 50% Dekasyl MS-5 can be painted with the most industrial paints already 10 minutes after
application. Best adhesion of paint coats is generally obtained if painted within 4 hours after applying Dekasyl
MS-5. Cleaning tools or removing uncured residue of Dekasyl MS-2 can be done with a clean colourless cloth,
wetted with e.g. acetone or MEK. It is recommended to make a trial first to check possible attack of the substrate
by these cleaners.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 650 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 650 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 650 - MobiSet 3 Twin

Kathrein CAP 650 - MobiSet 3 Twin User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info