631715
23
Zoom out
Zoom in
Previous page
1/56
Next page
23 of 56
NOTICE
Risk of malfunction or material damage due to overheating!
If the CAP converter is attached to another electrical device, e.g. a TV set, the temperature rise of each unit in
operation can affect the other, thus causing overheating.
Before installing the CAP converter on another electrical device, check with the manufacturer of the device
or in the documentation supplied with it whether this is permissible, and if so, what ttings (screws, etc.)
are necessary or can be used.
Using other Screws
If because of the installation location or factors associated with it, the
screws supplied cannot be used, refer to the gure on the right when
selecting the screws to be used. The gure shows you the cross-
section area of the screw sockets on the CAP converter. From this, it is
possible to see the characteristics of the screws which can be inserted
into the receiver support, e.g. diameter, screw head proles etc.
6.6
5.2.4 Installing the CAP Converter on a TV Set
DANGER
Danger to life from electric shock!
If the screws penetrate too deeply into the TV set, they may damage it beyond repair and cause the risk of a
fatal electric shock.
Before starting any installation work, disconnect all the units concerned from the mains.
Before installing the CAP converter on another electrical device, check with the manufacturer of the device
or by reference to the documentation supplied with it whether this is permissible, and if so, what ttings
(screws, etc.) are necessary or can be used.
CAUTION
Risk of material damage and injuries from overheating and fire!
Under no circumstances install the CAP converter between a TV set and a wall support.
Installation of the CAP converter on the rear panel of a TV set is permissible only if the TV set is resting on
a stand that is attached in some other way.
For installation on the rear panel of a TV set, securing with two screws is sufcient. Before installing the CAP converter,
pay attention to the following:
The TV set must have one of the following hole patterns for wall mounting on its rear panel: 100 x 100; 100 x 200;
200x200 or 200 x 400. If this is not the case, a VESA adaptor plate can be obtained from a specialist dealer.
Before installing the receiver it is essential you read the section Wall mounting (or the equivalent) in the user instruc-
tions for your TV set. This will tell you the screw diameters (M4, M6 or M8) and, most importantly, the permissible
screw penetration depth.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 650 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 650 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 650 - MobiSet 3 Twin

Kathrein CAP 650 - MobiSet 3 Twin User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info