631715
17
Zoom out
Zoom in
Previous page
1/56
Next page
17 of 56
Secure the cable gland from inside the vehicle by tightening the ribbed nut supplied (Fig.A).
Note that the curing of the adhesive sealant depends on the ambient temperature and the humidity.
The nal strength is reached only after approx.2days. However, this need not restrict further installation work,
since the mounting plate is held in place by the tightened screws.
5.1.5 Possibilities of the Turntable Installation
Variant with Cable Gland underneath the Turntable
1. Feed the ends of the cables with the connectors as far as possible through the cable duct into the interior of the
vehicle.
2. Lift the turntable and place it carefully on the mounting plate in the direction of travel (see Fig. E). Make sure not to
step on the connectors or kink or crush the cables.
3. Align the through holes on the turntable with the threaded holes on the mounting plate. When lowering, make sure
that the cables are fed through the cable gland and are not crushed.
4. Apply a little adhesive sealant to the six threaded holes in the mounting plate and screw the fastening screws into the
thread. Tighten the screws to a torque of 6Nm.
5. To prevent water vapour from inside the vehicle reaching the turntable through the roof gland, thread the three cables
through the sealing gasket supplied and insert the gasket into the roof gland until it reaches the stop, see Fig. E.
Make sure that no tensile load is acting downwards on the sealing gasket as this can cause it to fall out in the course
of time.
Fig.E
Gasket with plug for
the unused duct
Battery/ignition
CAP converter,
second TV/Receiver
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 650 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 650 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 650 - MobiSet 3 Twin

Kathrein CAP 650 - MobiSet 3 Twin User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info