631710

Kathrein CAP 210 - MobiSet 2 digital Manual

29
Zoom out
Zoom in
Previous page
1/36
Next page
29
Polarisation setting
To dismantle/install the planar antenna from the turntable, proceed as
follows: (the key names refer to the remote control for the UFD 170
receiver)
1. Turn on the receiver with the main switch on the front of the unit.
2. Press the Standby button (
) to start up the receiver.
3. First of all, “Welcome UFD 170” and you will then see the message
“Please wait, initialising HDP”.
4. Wait until you see the message “Astra position unknown,
press OK to start search mode” and cancel this operation with
the
button.
5. Next, press the
button to go to the main menu, use the

buttons to navigate to the option “HDP antenna setup” and confi rm
your selection by pressing the button.
6. Use the

buttons to select the Elevation option and use
the number keys on the remote control to enter “400”.
7. Press the button and the turntable will move to the selected
elevation angle.
8. Turn off the UFD 170 using the main switch on the front and
disconnect it from the power.
9. Unscrew the antenna fastening screws on the turntable with a
suitable hexagon socket key (size 5), see photograph on left.
10. Carefully lift the antenna off the turntable and exchange the
slot for the rubber bushing with cable and the relevant dummy
bushing (depending on the direction you want to move the
antenna).
11. You can now refi t the antenna with the desired change of angle
(+15° or -15°) (see picture below).
12. Tighten the hexagon socket screws to a torque of 6-7 Nm.
13. Leave the installation location and reconnect the UFD 170 to
the power supply.
14. Turn on the receiver, fi rst with the main switch and then with the
Standby button (
).
15. “Welcome UFD 170” appears.
16. You will then see the message “Please wait, initialising HDP”. Wait
until you see the message “Astra position unknown, press OK to
start search mode” and cancel this operation with the
button.
17. Change to the main menu with
, use the

button to
change to the “HDP antenna set-up" menu element, and confi rm
with
. Use the

button to change to the “Reset/park”
menu element, change the selection to "Reset" with the buttons
and confi rm with
. After the antenna has been reset, you can
return to the normal TV picture with the
button.
In motorhome/caravan
On the turntable
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 210 - MobiSet 2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 210 - MobiSet 2 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 210 - MobiSet 2 digital

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - French - 36 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info