Manual Karomat KD 900-170 (page 22 of 32) (English, German, Dutch, French)

500855

Zoom out

Zoom in

1/32

and masks.

- If cleansing agents have to be thinned, care for a good and even mixture. This

is especially adviced for powder detergents. If not mixed well, it can cause

damage to machine and hoses or spouting gun. Spray the water and soap

mixture over the surface to be cleaned, leave it a few minutes, before you wash

it off with clean water.

- Often the dirt has to be touched to remove it. Then a washingbrush or rotating

brush can be a very usefull accessory.

7. MAINTENANCE

Regular maintenance of your machine will increase durability and reliability.

▪ Before carrying out any maintenance jobs it is obligatory to stop the machine

and disconnect it from the power mains.

▪ Always use original spare parts. Never use the machine if one of the parts is

damaged.

▪ Regularly check the oil level. Use oil of the same type as that already is in the

machine; do not mix different types of oil.

▪ Refresh oil every 200 workinghours or at least once a year with Airpress oil.

First time refresh oil after aproximately 50-100 hours.

Always respect the regulations in force for disposing of old oil.

8. POSSIBILITIES OF FAILURE

Failure: Cause: What to do:

1. Machine does not -blown fuse renew fuse

function -defective cable repair

-thermal failure let the machine cool down

and reset red button

-loos wire repair

2. Pressure is too low -wrong nozzle in gun mount right nozzle

-pump sucks false air check pipes and hoses at

the suction side on leakage

-loos pressure regulator fasten regulator

-leakage at pressure side check spouting gun and

hose

-insufficient water supply supply more water

-water supply filter clean filter clogged

3. No soap supply -no soap add soap

-suction hose clean hose clogged

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karomat KD 900-170 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karomat KD 900-170 Manual

Product: