500867
26
Zoom out
Zoom in
Previous page
1/52
Next page
26
Know how to stop the product and bleed pressure quickly. Be thoroughly
familiar with the controls.
Stay alert and watch what you are doing.
Do not operate the product when fatigued or under the influence of alcohol or
drugs.
Keep operating area clear of all persons.
Do not overreach or stand on unstable support. Keep good footing and
balance at all times.
Follow the maintenance instructions specified in the manual.
This product must be grounded. If it has malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of
electric shock. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and
ordinances. The rating voltage (V/Hz) of the appliance has to be in
compliance with the local power supplying voltage.
Check with a qualified electrician or service personnel if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with
the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician. Do not use any type of adapter with this product.
Use only 3-wire extension cords that have 3-prong grounding-type plugs and
3-pole cord connectors that accept the plug from the product. Use only
extension cords that are intended for outdoor use and the socket must be of
watertight construction. These extension cords are identified by a marking
"Acceptable for use with outdoor appliances; store indoors while not in use."
Use only extension cords having an electrical rating not less than the rating of
the product. Do not use damaged extension cords. Examine extension cord
before using and replace if damaged. Inadequate extension cords can be
dangerous. Do not abuse extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and sharp edges. Always disconnect
the extension cord from the receptacle before disconnecting the product from
the extension cord.
If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent; and should not
change the length of the cable.
To reduce the risk of electrocution, don’t start and run the machine in the rain
or storm. Keep all connections dry and off the ground. Do not touch plug with
wet hands. It is strictly prohibited to let water leak into the machine.
When the machine is running, please maintain a constant water supply.
Without water circulation will damage the sealing rings of the machine.
Don’t start and run the machine in a place excessively cold so as to prevent
the machine from the freezing current.
This appliance has been designed for only using cleaning water, do not use
corrosive chemicals.
Do not use the appliance within the range of persons unless they wear
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karomat HD 900-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karomat HD 900-150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info