500835

Karomat 66608 Manual

32
Zoom out
Zoom in
Previous page
1/52
Next page
30
HOW TO AVOID DAMAGING SURFACES
Damage to cleaning surfaces occurs because the impact force of the water
exceeds the durability of the surface. The impact force can be varied by
controlling the three previously noted items. Never use a narrow high impact
stream or a turbo/rotary nozzle on a surface that is susceptible to damage.
Avoid spraying windows with a narrow high impact stream or turbo nozzle as
this may cause breakage. The surest way to avoid damaging surfaces is to
follow these steps:
1. Before triggering the gun, adjust the nozzle to a wide fan pattern.
2. Place the nozzle approximately 1,5 meter from and 45 degrees to the
cleaning surface, and trigger the gun.
3. Vary the fan pattern spray angle and the distance to the cleaning surface
until optimum cleaning efficiency is achieved without damaging the surface.
TURBO NOZZLE (NOT INCLUDED WITH ALL MODELS)
A turbo nozzle, sometimes referred to as a rotary nozzle, is a very effective tool
that can significantly reduce cleaning time. The turbo nozzle combines the
power of a narrow high impact stream and the efficiency of a 25 degree fan
pattern. This swirls the narrow high impact stream into a cone shape that cleans
a larger area.
CAUTION: Since a turbo nozzle uses a narrow high impact stream, only use it
in applications where the cleaning surface cannot be damaged by narrow high
impact spray. Additionally, the turbo nozzle is NOT adjustable and cannot be
used to apply detergent.
DETERGENTS
The use of detergents can dramatically reduce cleaning time and assist in the
removal of difficult stains. Some detergents have been customized for pressure
washer use on specific cleaning tasks. These detergents are approximately as
thick as water. The use of thicker detergents, such as dish soap, will clog the
chemical injection system and prevent the application of the detergent.
The cleaning power of detergents comes from applying them to a surface and
giving the chemicals time to break down the dirt and grime. Detergents work
best when applied at low pressure.
The combination of chemical action and high pressure rinsing is very effective.
On vertical surfaces, apply the detergent starting at the bottom and work your
way upward. This will prevent the detergent from sliding down and causing
streaks. High pressure rinsing should also progress from the bottom to top. On
particularly tough stains, it may be necessary to use a brush in combination with
detergents and high pressure rinsing.
6. OPERATION
The following cleaning procedure will help you to organize your cleaning task,
and ensure that you achieve the most beneficial results in the shortest amount
of time. Remember to use the spraying/cleaning techniques previously listed.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karomat 66608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karomat 66608 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info