Manual Karomat 66595 (page 28 of 52) (English, German, Dutch, French)

500866

Zoom out

Zoom in

1/52

3.2 WATERCONNECTION

For quick connection of hoses are cleaner and accessories equipped with high

pressure screw couplings and waterhose couplings.

Beware that the cleaner always gets sufficient water. The waterconsumption of the

machine reaches up to 900 ltrs/hour for the HD 900-150 and the HD 900-200, and

600 ltrs/hour for the HD 600-100. That amount your waterconduit should deliver.

So use hoses of sufficient diameter and turn tap fully open. Beware that hoses do

not bend or leak. Do not place any heavy objects on hoses, nor place hoses over

sharp edges.

4.0 FIRST USE

1. Check if the instructions mentioned above have been executed.

2. Check the oil level of the compressor. Possibly oil is lost during transport. Fill if

necessary with good quality oil (Airpress) through the fillercap. The level has to

be between the top of the oil glass and the red dot on it.

5.0 OPERATING

Fill the fuel tank (No. 7) with diesel oil or domestic fuel oil. The machine is built for

optional detergent usage.

The HD 900-150 and the HD 900-200 are built to spray the detergent along from

an internal tank: this tank (No. 19) and the fillercap are placed under the hood.

However, the HD 600-100 has external detergent possibilities.

Refill detergent tank if necessary. Use exclusively good cleansing agents, in liquid

form to prevent blockages and sludging in hoses, pipes, tubecoil etc. If powder

detergent is needed, mix them thorrowly with (hot) water and then use them in the

machine. We advise you not to use powder agents in the internal tank because of

deposit.

The waterconnection between tap and cleaner is made by connecting the coupling

(No. 6) and opening the tap. Open the watersupplytap (and maincock) widely, so

that the cleaner gets sufficient water.

Connect high pressure hose with gun by means of couplings to the cleaner (No.

9). If necessary connect a brush to the gun. If the apparatus has not been used for

a long period of time, you are advised to take the nozzle out of the gun, and to

have the apparatus flushed with clean water for some time.

Check wether the on/off switch (No. 1) is off. Make electric connection by putting

the plug into a socket with marginal earth.

Now switch on the machine. By squeezing the trigger of the spouting gun you will

get a waterbeam. On the pressure gauge (No. 4) you can read the pressure of the

water. You can change the pressure by turning the pressure regulator (No. 5). Left

for lower pressure, right for higher. When you stop spraying, the machine keeps

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karomat 66595 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karomat 66595 Manual

Product: