500865
31
Zoom out
Zoom in
Previous page
1/52
Next page
31
6.0 MAINTENANCE
Before starting maintenance to the machine, check:
- if electricity has been cut off.
- if pressure is released from hoses and pipes by pulling the trigger of the
spouting gun.
Maintenance now can begin:
* Weekly check the oil level. After the first 50 hours, oil must be drained and
refreshed. Turn out the drainplug and collect the oil. Then turn in the plug and
fill through fillercap on top of the pump. The right oillevel is between the top of
the oil glass and the red dot on it. Refresh the oil after every 500 hours or 3
months. Right oil type is Airpress oil.
* Clean tankfilter and filleropening of the fuel tank every month.
* Decalcify heating tube coil when necessary. Frequency depends on the
amount of calcium in your water. When decalcifying acid is used follow the
instructions of the manufacturer in order to prevent damage to the machine.
MAINTENANCE TABLE
Every week
Every month
Every 3
months
If necessary
Check the oil level
*
Clean the tank
filter
*
Refresh the oil
*
Decalcify the
heating tube coil
*
7.0 FUNCTIONING AND PROTECTION
The on/off button (No. 1) starts the electromotor. This switch is also the
resetbutton for the thermal overload device, which protects the motor from
overheating.
The high pressure water pump (No. 13) is direct driven by the motor. Low pressure
water from your own watersupply runs through a self controlled floatation tank (No.
12) (however, the HD 600-100 does not have a floatation tank) to the pump. Deter-
gent can be mixed in by a dosaging cock (No. 8) from an internal (No. 19) or
external tank.
The pressure control valve (No. 5) (does not apply to the HD 600-100) controls the
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karomat 66590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karomat 66590 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info