500865

Karomat 66590 Manual

27
Zoom out
Zoom in
Previous page
1/52
Next page
27
protective clothing.
▪ High-pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons, live electrical equipment or the appliance itself. Pressure
washers should not be pointed at tire walls, as it may be possible to damage
them.
▪ Do not direct the jet against yourself or others in order to clean clothes or
footwear.
▪ Disconnect from the electrical power supply before carrying out user
maintenance.
▪ To ensure the appliance safety, please use only original spare parts from the
manufacturer or approved by the manufacturer. Do not use the machine
before you changed them if they are damaged.
▪ WARNING: the warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be
supplied by the operator.
▪ Only those persons who are aware of how to use the appliance by having read
this manual, should use the machine. Injudicious use may cause danger.
3.0 PLACING
The Karömat high pressure cleaner is equipped with 4 rubber wheels which allow
the machine to move lightly even on difficult surfaces.
The Karömat high pressure cleaner should be placed always as horizontal as
possible. Do not use the cleaner in an enclosed space and in rooms with danger of
explosion. Take care of sufficient waterdischarge and sufficient air for the burner.
Because of the smoke produced by the burner, the machine should only be used
in open air or in very well ventilated rooms. If the machine is to be connected to a
permanent funnel, place a trapezium shaped cap about 10 cm above the chimney
of the cleaner. Funneldiameter should be at least 18 cm.
Protect the machine in winter against temperatures below zero. Place the cleaner
in a frostfree environment or let antifreeze circulate through the machine.
3.1 ELECTRIC CONNECTION
In the factory the machine is already fully equipped with cables. The machine now
has to be connected to your own electric circuit. Connect the cleaner to a separate
group. Beware that voltage and amperage of your electric circuit meet the needs
of the machine. Therefore check technical details (9.0).
Use only cables with the right diameter. The factory advises to use cables of at
least 4 x 2.5 qmm for the HD 900-150 and the HD 900-200, and a cable of 3 x 2.5
qmm for the HD 600-100.
Never lay the plug and contact cover in water, and never put them in a place
where it can get wet from spraying. Danger for electrocution!
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karomat 66590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karomat 66590 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info