725022
16
Zoom out
Zoom in
Previous page
1/192
Next page
16 English
Correct storage of the device
Store the device by hanging from the eye in
the handle. You can also alternatively place
the device on the edge of the protective
cover.
ATTENTION
Risk of damage to the bristles
Do not store the device standing on the
bristles.
Care and service
Changing the bristle strip
Note
The bristle strip must be replaced when the
bristles show signs of wear.
1. Remove the battery pack from the de-
vice.
2. Screw open the handle lock of the bristle
strip holder in a clockwise direction and
remove it.
Illustration G
3. Pull out worn out bristle strip and the re-
moval aid.
4. Join the new bristle strip into a crown by
snapping the ball into the recess.
Illustration H
5. Place the bristle crown into the holder.
Illustration I
6. Put on the guide aid including the bristle
strip locking cover and screw closed in
an anti-clockwise direction.
Illustration J
Replacing the protective cover
WARNING
Risk of injury from flung particles
Use the weed remover only with an intact
protective hood.
The protective cover must be replaced
when it shows signs of wear such as cracks
or fractures.
1. Remove bristle strip.
2. Release the lock on the protective cover
with a flat-blade screwdriver.
Illustration Q
3. Pull the protective cover away to the
rear.
4. Attach the new protective cover and
snap it into place; see chapter Assem-
bly.
Cleaning
The battery pack must be removed from the
device before cleaning.
ATTENTION
Improper cleaning
Damage to the device
Do not clean the device with a hose or high-
pressure water jet.
Do not use aggressive detergents.
Do not knock the brush on the ground.
1. Remove the battery pack.
2. Remove the plant residue using a brush.
3. Clean the device with a moist cloth.
Removing the second handle
Illustration R
The second handle can be removed for re-
pair purposes.
1. Release the lock on the second handle
with a flat-blade screwdriver.
2. Pull the second handle downwards and
out of the holder.
Take care to ensure that the second handle
engages on re-installation.
Troubleshooting guide
Malfunctions often have simple causes that
you can remedy yourself using the follow-
ing overview. When in doubt, or in the case
of malfunctions not mentioned here, please
contact your authorised Customer Service.
As the battery pack ages, even if it is looked
after, its capacity reduces such that the full
run time will no longer be reached when ful-
ly charged. This does not indicate a defect.
The device does not start up
The battery pack is not inserted correctly.
1. Push the battery pack into the mounting
in the device until it audibly latches into
place.
The battery pack is discharged.
1. Charge the battery pack.
The battery pack is in sleep mode.
1. Press and hold the power switch longer
or press the power switch a second time.
The battery pack is defective.
1. Replace the battery pack.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher WRE 18-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher WRE 18-55 in the language / languages: All languages as an attachment in your email.

The manual is 26,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info