478156
20
Zoom out
Zoom in
Previous page
1/276
Next page
– 10
Note:Always clean all the accessories that
you use and the water filter container (17)
before you put the machine away.
Remove all accessories.
Rinse all the accessories with clean wa-
ter from the tap and then let them dry.
Lift the handle (18) of the water filter
container (Fig. 2) and remove the water
filter container (17) (Fig. 3).
Turn the handle as shown in Fig. 4 and
remove the water filter unit (19).
Empty the water filter container by tilting
it in the direction of the pouring device
(Fig. 10).
Remove the pipe benders (23) from the
filter casing with the micro-perforation grid
(22) till it is fully detached (Fig. 11a).
Remove all components and wash
them under flowing water. (Replace the
filter if it is damaged. Please contact an
authorised Customer Service to pro-
cure a new filter).
Insert the water filter inlay (19) back into
the water container (17).
ƽ Caution!
Ensure that the arrow on the pipe bender
(23) matches the marking on the filter with
micro-perforation (22) (Fig. 11b).
Roll the supply cord up evenly and
place it in the cord compartment (13)
(Fig. 8).
Place the water filter container (17)
back into its position and ensure that it
is positioned correctly.
Please read the cleaning instructions of the
manufacturer before treating leather, spe-
cial fabrics and wooden surfaces and al-
ways do a trial on a sample or some hidden
part. Let the steam-treated surface dry and
then check whether there are any changes
to the colour or form on account as reaction
to the steam.
We recommend that you be very careful
while cleaning wooden surfaces (furniture,
doors, etc.) because long exposure to
steam can damage the wax coating, the fin-
ish or the surface colours. Hence we rec-
ommend that you use steam only for short
intervals or first clean the surface with a
cloth that has been steam-moistened.
For highly sensitive surfaces (for e.g. syn-
thetic materials, painted surfaces, etc.) we
recommend that you use the steam func-
tion at the minimum performance level.
We recommend that you use the floor noz-
zle on large surfaces, ceramic floors, mar-
ble floors, parquet (only at maximum
vacuum cleaning level and minimum steam
level), carpets, etc. by using the following
attachments.
Bursh lamellas (D1) for dry vacuum
cleaning.
Hard rubber lamellas (D2) for cleaning
and brushing carpeted floors.
Rubber lamellas (D3) for sucking in liq-
uids on smooth surfaces.
Remove existing attachments from the
side.
Insert the desired attachments from the
side (Fig. C).
Hinweis:Push the brush lamella with crev-
ices in the front, the second one at the rear
of the nozzle.
While inserting rubber lamella (D3) make
sure that the smooth surface is on the inner
side.
Storing the Appliance
Emptying and cleaning the water filter
container
How to Use the Accessories
Floor nozzle (D)
Mounting the attachments
20 EN
20


Need help? Post your question in this forum.

Forumrules
1

Forum

karcher-sv-1905

Reset search

  • Hi I haven't used my Karcher SV 1905 in 5 years, the vacuuming function is ok, and when i turn on heat switch , the body gets hot, however there is no steam whatsoever. Not sure what to do Submitted on 13-2-2022 at 06:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher SV 1905 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SV 1905 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info