657266
153
Zoom out
Zoom in
Previous page
1/168
Next page
– 3
提示
自动运行时水平传感器自动掌控泵操作。
一旦接通泵,水平传感器就接触到不断增
加的输送液体。
一旦泵关掉,水平传感器就与下降的输送
液体失去接触,跟踪时间持续 15 秒。
接通:
泵进行自动抽吸所需的最低液位 (= 最低
接通点)
SP 6 Flat Inox7 mm(在使用初效滤网时
为 57 mm)
SP 7 Dirt Inox:50 mm
液位传感器可调节的最高切换高度:
SP 6 Flat Inox190 mm,不使用初效滤网
(在使用初效滤网时为 240mm)
SP 7 Dirt Inox:237 mm
最低残液高度 / 最大抽吸深度:
泵可以抽吸的最大残液高度
SP 6 Flat Inox:1 mm (不使用初效滤网,
支脚折回)
SP 7 Dirt Inox:35 mm
提示
建议使用初效滤网。
提示
请注意将泵水平放置。
此外它能使水平传感器不失去液体接触并
使泵无润滑运转。
将水平传感器移到希望的接通高度 (与
输送液体接触)
提示
水平传感器放置得越高,接通和切断点越
高。
使用范例参见以下图表:
设置开关至自动运行 (AUTO)。
插上电源插头。
提示
手动运行时,泵始终保持开启状态。
设置开关至手动运行 (MAN)。
插上电源插头。
注意
损伤危险!无润滑运转导致磨损增加,泵
在手动运行时不能处于无人监管状态。在
无润滑运转时立即标记
自动运行
最低 / 最高 SP 6 Flat
Inox
SP 7 Dirt
Inox
直径 < 大约为
1 米的井 (例
如排水设备)
水平传感器
在最上面的
位置
水平传感器
在最上面的
位置
建议使用初
效滤网。
关闭初滤器
翻转 (防止
污染)
游泳池、池塘
(仅限 SP 7
Flat Inox)或
类似地点
水平传感器
在最下面的
位置
水平传感器
在最下面的
位置
启动配备初
滤器或支脚
向外翻转的
泵运行
关闭初滤器
翻转 (防止
污染)
继续配备初
滤器和支脚
向内翻转的
泵运行 (残
液高度达 1
毫米)
提示
以手动模式
进行。对关
/ 齐平抽
吸进行监
控。
-
手动运行
最低 / 最高 SP 6 Flat
Inox
SP 7 Dirt
Inox
153ZH
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher SP 6 Flat Inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SP 6 Flat Inox in the language / languages: All languages as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info