Manual Karcher SP 16.000 Dirt (page 10 of 148) (All languages)

803800

Zoom out

Zoom in

1/148

10 English

*Not included in the scope of delivery.

Initial startup

DANGER

Risk of electric shock and risk of injury!

The device contains electrical and mechanical compo-

nents.

Always disconnect the device from the power supply

before assembling, disassembling or cleaning.

Note

The shorter the hose length and larger the hose diame-

ter, the higher the delivery rate.

To avoid clogging the pump, use a pre-filter for hose di-

ameters smaller than 1 ¼″.

●SP 16.000 Dirt Special accessories

●SP 22.000 Dirt Integrated in the foot

The pump connection is equipped with a plug system

(Quick-Connect).

The connection nozzle with pump connecting piece G

1 ½ and G 1 threaded connection are supplied unas-

sembled with the device.

Note

Hoses with a diameter of 1″, 1 ¼″ and 1 ½″ can be

con-nected to the pump connecting piece G 1 ½.

A sufficiently large hose diameter must be selected and

the G 1 ½ pump connecting piece must be shortened at

the grooves so that the required particle size can be

pumped. A large hose diameter is also recommended

for smaller particle sizes to allow a high flow volume.

Connecting a hose to the pump when using a 1″, 1

¼″ or 1 ½″ hose:

1 Screw the G 1 ½ pump connecting piece onto the

connection nozzle.

Illustration B

2 Push the hose clamp onto the hose.

3 Push the hose onto the G 1 ½ pump connecting

piece and fasten it with a hose clamp.

4 Push the connection nozzle into the Quick-Connect.

Illustration C

Connecting a hose to the pump when using a ¾″ or

1″ hose (SP 16.000 Dirt):

1 Screw the G 1 threaded connection onto the con-

nection nozzle.

2 Fit the special accessory G 1 pump connecting

piece(6.997-359.0 pump connecting piece G 1

(33.3 mm) incl. check valve - not included in the

scope of delivery) onto the G 1 threaded connec-

tion:

a Place the check valve on the G 1 threaded con-

nection so that the lettering "UP" is legible.

b Screw the pump connecting piece G 1 onto the

G 1 threaded connection.

3 Push the hose clamp onto the hose.

4 Push the hose onto the pump connecting piece G 1

and fasten it with a hose clamp.

5 Push the connection nozzle into the Quick-Connect.

Illustration C

Erecting/immersing the pump:

1 Fit the height adjustment of the float switch into the

lock.

Illustration D

2 Place the pump securely on solid ground in the

pumped liquid or immerse it via a rope attached to

the carrying handle.

Note

The suction area must not be blocked by soiling. If the

ground is muddy, place the pump on a brick or similar.

Make sure that the pump stands level. Do not carry the

pump using the cable or hose.

Operation

DANGER

Danger of death from electric shock.

Danger of death from electric shock if live parts are

touched.

During operation, do not touch the rope attached to the

carrying handle or any objects that are in contact with

the pumped liquid (e.g. pipelines protruding into the

pumped liquid, railings) and do not reach into the

pumped liquid.

Automatic venting device

1. If the fluid level is low, any sucked-in air, or air pres-

ent in the pump, may escape via the automatic vent-

ing device. Fluid can also leak along with air.

If the pump has problems with suction when the fluid

level is low, unplug and plug in the mains plug re-

peatedly to assist the suction process.

Illustration E

Automatic mode

1. Adjust the float switch via the height adjustment and

the cable length.

Note

If the pump is operated unattended, always set the float

switch to the top position to ensure reliable pump

switch-off.

Illustration F

Note

When the pump is set to the lowermost position, set the

cable length between the float switch and the lock to

2.5 cm, see marking on the cable.

Illustration G

2. Plug the mains plug into the socket.

Note

In automatic mode, the float switch controls the pump-

ing process automatically.

The pump switches on as soon as the float switch

reaches the switch-on height caused by the rising fluid

level.

The pump switches off as soon as the float switch

reaches the switch-off height caused by the sinking fluid

level.

The float switch must be able to move freely.

The cable length between the float switch and the lock-

ing device must be at least 2.5 cm.

Switch-on height / switch-off height (float switch

in lowest position):

Min / Max SP 16.000 Dirt SP 22.000 Dirt

Switch-on height

cm*

18 / 21 20 / 24

Switch-off height

cm*

4 / 12 6 / 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SP 16.000 Dirt in the language / languages: All languages as an attachment in your email.

The manual is 3.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher SP 16.000 Dirt Manual

Product: