Manual Karcher SCP 7000 (page 13 of 58) (English, German, Dutch, French, Italian, Portuguese, Spanish)

477948

Zoom out

Zoom in

1/58

English 13

 Do not scrape the power cord across

sharp edges and ensure that it does not

get pressed.

 The voltage indicated on the type plate

must correspond to the voltage of the

electrical source.

 To avoid risks, all repairs and replace-

ment of spare parts may only be carried

out by the authorised customer service

personnel.

 Follow the rules for electrical safety of

equipment:

Immersion pumps should be operated

in swimming pools, garden ponds and

fountains only using a earth-leakage cir-

cuit breaker with a nominal leakage cur-

rent of max. 30 mA. Do not operate the

pump if there are persons located in the

swimming pool or the garden pond.

For safety reasons, we recommend that

you operate the appliance only via a

earth-leakage circuit breaker (max. 30

mA).

The electrical connection of the system

may only be performed by a qualified

electrician. Please follow the respective

national regulations!

In Austria pumps to be used in swim-

ming pools and garden ponds should be

equipped with a fixed connection line

according to ÖVE B/EN 60555 Part 1 to

3; power supply should be via a ÖVE-

tested isolating transformer whereby

the secondary nominal voltage should

not exceed 230V.

This device is not intended for use by

persons (including children) with re-

duced physical, sensory or mental abili-

ties or lacking experience and/or

knowledge, unless they are supervised

by a person responsible for their safety

or are instructed by these persons on

the use of the device. Children should

be supervised, in order to guarantee

that they do not play with the device.

1 Power cord with plug

2 Level sensor

3 Level sensor stopper

4 Carrying handle

5 Hose connection 1" (25.4 mm)

Illustration

Î Screw the hose connection on to the

pump

Note

The shorter the hose, the higher the feed

rate.

Î Push the hose on the hose connection

and fasten it with appropriate hose clip

Illustration

Î In automatic operations mode, set the

required switching height by clamping

the level sensor cable in the stopper.

Illustration

Î In manual operations mode, align the

level sensor upward (cable pointing

downward). Tip: Push the cable of the

level sensor like a loop through the han-

dle.

Illustration

Î Place the pump on a level, stabile sur-

face in the liquid to be transported, en-

sure that it is standing firmly or immerse

it using a rope tied to the handle.

The suction area should not be blocked

fully or partially through the impurities.

Start up

Description of the Appliance

Preparing the Appliance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SCP 7000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher SCP 7000 Manual

Product: